A zirconia crown in Turkey typically costs a fraction of UK private prices, with savings of around 75–80% once you compare like-for-like materials, not a vague “up to 90% off” figure designed to grab attention. At DRA Dental, zirconia is our primary recommendation for cosmetic and restorative crowns, not just the cheapest option on the list. Here’s exactly what determines the price, and what’s actually included in it.
Key Takeaways
- Zirconia crowns in Turkey cost significantly less than the £600–£1,200 typical UK private price, even after travel costs
- DRA Dental recommends zirconia as the primary crown material, ahead of E-max, for most cosmetic cases
- DRA Dental uses layered zirconia for every crown, front and back, so there’s no shade mismatch between them
- Material sourcing (Dental Direkt and Duradent) is confirmed in writing before treatment, not left vague
- Send your case via WhatsApp for a written, case-specific quote before you book anything
Zirconia Crown Cost in Turkey vs the UK
Zirconia crowns aren’t available on the NHS in England — they fall outside the standard NHS Band 3 crown charge, which currently sits at £332.10 for a course of treatment, according to NHS guidance on dental treatment costs. If you specifically want zirconia, you’re comparing private UK prices, which typically run £600–£1,200 per tooth depending on location and clinic.
| Treatment | UK Private Dentist | Estimated Saving |
|---|---|---|
| Zirconia crown (per tooth) | £600–£1,200 | ~75–80% |
| Request a Free Quote → | ||
That gap holds even once flights and accommodation are factored in, particularly for patients needing more than one or two crowns, where the total UK bill climbs quickly.
Emma, a 44-year-old from Leeds, needed four crowns replaced after years of wear on old fillings. Her UK quote for zirconia came to just under £4,000. Once she compared that against treatment in Antalya, including flights, the difference was large enough that she flew out within six weeks of her first WhatsApp message to our dental team.
Why Zirconia Costs What It Does
Price isn’t the only reason DRA Dental uses zirconia. Our preferred material sources are Dental Direkt and Duradent, confirmed in your written treatment plan rather than left as a vague “premium materials” claim. Other material preferences can be discussed with our team if you have a specific brand in mind.
Want a written, itemised quote before you commit to anything? Send your case details via WhatsApp, and our dental team will confirm your specific cost based on how many crowns you need.
A WhatsApp estimate based on photos gives you a realistic starting figure, but the confirmed price comes after your Day 1 panoramic X-ray, once our dental team can see exactly what’s happening below the gumline. For most patients the two numbers are close, but the written plan you receive on Day 1 is the one that actually applies to your treatment.
Why DRA Dental Uses Layered Zirconia for Every Crown
Zirconia crowns generally come in two forms: monolithic, milled as a single solid block and often used for back teeth where bite force is highest, and layered, with a porcelain layer added over the zirconia core for extra translucency, typically reserved for front teeth. Many clinics mix the two depending on where the crown sits.
DRA Dental uses layered zirconia across the whole mouth, front teeth and back teeth alike. Switching materials by tooth position can leave a visible shade difference between the two zones, particularly where a back crown shows when you smile or laugh. Using one consistent material throughout avoids that mismatch.
This doesn’t come at the cost of strength. The zirconia blocks we source (see below) are dense enough that layered zirconia holds up under normal biting and chewing without the trade-off sometimes associated with lower-grade layered zirconia. The result is a smile that matches in colour and texture all the way through, not just at the front.
James, a 38-year-old from Newcastle, had read that some clinics use one crown type at the back of the mouth and another at the front, and was concerned this might leave a visible line where the two materials met. Our dental team explained that DRA Dental uses the same layered zirconia throughout his case, so there’s no seam or shade break between his back and front crowns, just one consistent, natural-looking result.
What’s Included in DRA Dental’s Zirconia Crown Price
A quoted price for a zirconia crown at DRA Dental isn’t just the crown itself. It’s built around:
- Consultation and a panoramic X-ray to assess the tooth and surrounding structure
- Tooth preparation and digital impressions
- A temporary restoration while your permanent crown is milled
- The final zirconia crown, fitted and checked for bite and colour match
- Ten-year guarantee on the finished restoration
This is confirmed in a written treatment plan before you travel, so the number you’re quoted is the number you pay, not a starting figure that grows once you’re in the chair.
Zirconia vs E-max — Why DRA Recommends Zirconia First
Both zirconia and E-max are strong, tooth-coloured crown materials, and both are used in modern cosmetic dentistry. DRA Dental recommends zirconia as the first option for most cases because new-generation multilayer zirconia now matches E-max’s natural translucency while offering greater strength and durability. E-max remains available for specific clinical situations where our dental team recommends it, but it isn’t our default starting point.
This isn’t about one material being invalid, it’s about which one holds up better over years of normal biting and chewing for most patients. If you’re also weighing crowns against a dental bridge or an implant-supported restoration, our dental team can walk you through which combination actually fits your case rather than defaulting to one option for everyone.
Frequently Asked Questions
How much does a zirconia crown cost in Turkey compared to the UK?
Zirconia crowns in Turkey cost significantly less than the £600–£1,200 typical UK private price, with savings of roughly 75–80% common even after travel costs are included.
Is zirconia better than porcelain for a crown?
Zirconia is generally stronger and more chip-resistant than traditional porcelain, which is why it’s DRA Dental’s primary recommendation for both front and back teeth.
Do I need a different type of zirconia for front teeth vs back teeth?
No. DRA Dental uses the same layered zirconia for both front and back teeth. Using one material throughout avoids any shade difference between the two, and the blocks we use are dense enough that strength isn’t a trade-off, so you get a consistent, natural look across your whole smile.
What material is DRA Dental’s zirconia sourced from?
Our preferred sources are Dental Direkt and Duradent. Other material preferences can be discussed with our team.
Does the price include a guarantee?
Yes. Zirconia crowns placed at DRA Dental are covered by a ten-year guarantee on the restoration itself.
Where is DRA Dental Clinic located?
DRA Dental Clinic is located in Kundu, Lara Beach, Antalya, Turkey.
Getting a Real Number for Your Case
The honest answer to “how much does a zirconia crown cost in Turkey” depends on how many crowns you need, not a single number that applies to everyone. What stays consistent is the gap against UK private pricing, and DRA Dental’s approach of confirming your exact cost in writing before you travel.
Send your case details via WhatsApp, or get in touch for a written, itemised quote — no obligation.